Blocks RD50
The RD50 features a bigger volume of 500x500x500mm combined with an IDEX system enabling a rapid prototype time for large-scale parts.
The actively heated chamber up to 75ºC also makes it easy to print with a whole new range of technical filaments.
It also offers all the features present in the R21 such as Print Cores, Linear Guides, LCD touch, fully closed with HEPA filters, RunOut, and Flow Filament Sensor.
IDEX System
This system consists of a dual x carriage which means two printing heads in the X axis. This system is used to increase production and also to increase the possibilities of combining different filaments and different colors in the same part.
Allows printing of two identical models at the same time doubling the production.
Allows printing of two symmetrically parts.
Using soluble supports in one printing head allows the other printing head to create intricate and geometric difficult parts in the other printing head and remove with ease the supports.
Allows to print with two different materials to make combinations for final parts.
Heated Chamber
This machine is equipped with heaters in the chamber of the machine which allow it to heat the chamber up to 65ºC increasing the range of technical filaments that can be used.
True Z Leveling
True Z Leveling and Auto Bed Leveling
With 3 independent Z motors, Blocks RD50 can level the print plate with a maximum standard deviation smaller than the first layer of the part. It also has active Bed Leveling correcting the Z Axis during the print.
Print Cores
Blocks’ print cores are also equipped in this machine which allows for reduced maintenance time by simply changing the print core. With a range of different nozzle size print cores, the user can also change the print core depending on the desired print quality and time.
Massive Build Volume
With a volume of 125 liters, the build volume of this printer is capable of handling any task that the user might throw at it.
Safety and Sensors
Take a Closer Look
Technical Specifications
- Build Volume – 500 x 500 x 500mm
- Machine Dimensions – 822 x 822 x 1032mm
- Power – 24V/230 – 14 Amps
- Net Weight – 105kg
- Noise Emission – <55 dB(A) during operation
- Print Technology – FFF
- Print Head System – Dual Gear Direct Drive Extruder
- Filament Diameter – 1.75mm
- Print Head Travel Speed – 50-200mm/s
- Print Speed – 60mm/s
- Build Plate – Flexible Steel Plate with PEI coating and magnetic fixation
- Build Plate Leveling – Inductive Leveling Sensor
- Supported Materials – PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, Nylon, Glass Fiber Infused, Carbon Fiber Infused, Metal Fill, Wood Fill, etc
- Layer Height – 0.01mm-0.6mm (depending on the print core installed)
- Nozzle Diameter – 0.2, 0.3, 0.4, 0.5, 0.6, 0.8, 1.0, 1.2mm
- Max Build Plate Temperature – 120 ºC
- Build Plate Heating Time – <2 min to 55ºC, <6 min to 100ºC
- Max Nozzle Temperature – 275ºC to 400ºC (depending on the print core installed)
- Hotend heating time – <2 min to maximum temperature
- Connectivity – WiFi, and USB
- Marlin derived firmware
- Printing profiles provided for Ultimaker Cura, Slic3r, and Simplify3D.
Contact Us
Our customer support is here to help and guide into purchasing the 3D printer that best fits your needs.
